Screw-on disc magnet Ø 23 mm, height 4 mm, holds approx. 6,5 kg

Countersunk neodymium disc magnets can be screw-mounted with a countersunk head screw. This magnet has the north pole on the countersunk side, allowing it to be combined with the magnet CS-S-23-04-NR. They are only 4 mm thick and therefore very discreet for hanging up signs, tools, etc. Especially suitable for cabinetmaking, kitchen installations, booth construction and shopfitting, signage technology, etc. We also carry similar, but stronger countersunk pot magnets.

Please note: Not all holding surfaces are level, which is why magnets need a little slack. This allows them to optimally align with the ferromagnetic object and extend the highest adhesive force. That is why we recommend fastening these magnets by hand.

The following screws fit into the hole of these screw-on disc magnets, for example:

• Countersunk wood screws with groove: DIN 97 (3,5 mm)
• Recessed countersunk flat head screws (machine screw): ISO 7046-2 M3 (3 mm)
• Hexalobular socket countersunk flat head screws (machine screw): ISO 14581 M3 (3 mm)
• Hexagon socket countersunk flat head screws (machine screw): ISO 10642 M3 (3 mm)

Note: You cannot use two of these magnets directly together because their countersunk sides repel each other. Therefore, ensure correct polarity during installation.

Neodymium magnets are perfect for use in dry indoor areas.

Manufacturer: Webcraft GmbH / supermagnete, Industriepark 206, 78244 Gottmadingen, Germany, support@supermagnete.com