Q-CDM50-G: Block magnet 5 x 5 x 1,2 mm
Block magnet
| Article ID: | Q-CDM50-G |
| Material: | NdFeB |
| Shape: | Block |
| Size: | 5 x 5 x 1,2 mm |
| Tolerance: | +/- 0,1 mm |
| Coating: | Gold-plated (Ni-Cu-Ni-Au) |
| Magnetisation: | N50 |
| Strength: | approx. 450 g |
| Max. working temperature: | 80°C |
| Weight: | 0,23 g |
| PDF data sheet | |
| 20 pcs. | 0,25 EUR ea. | |
| from | 60 pcs. | 0,21 EUR ea. |
| from | 140 pcs. | 0,19 EUR ea. |
| from | 360 pcs. | 0,17 EUR ea. |
| from | 1100 pcs. | request price |
incl. 19% VAT
plus shipping
Order 20, 40, 60, etc.
available: 139000 pcs.
Andreas Maier from Wiesloch built this engine with the Q-CDM50-G. Here is his commentary: "We used: Stator D 20 mm, magnets 5x5x1,2 N50, air gap <0,1 mm. This resulted in ~70% of 8000 u/min and 6,5-7 amps of the whole in stellate with 3lipos LS 8x4,3." Get it? Don't worry too much about it, if you don't: These details are even a bit secretive and confusing for those of us in the office at supermagnete! :-)
For additional photos, see Q-CDM48-G.